Selecting the best case for water cooling can be difficult. Almost every PC chassis will, on paper, accommodate some type of water cooling. Despite this, not every tower will be able to accommodate the kinds of sophisticated specialised liquid-cooling loops that high-end gear requires.
If your computer has high-end components and internals, it’s critical to keep them cool because they generate a lot of heat. While entry-level components can be air-cooled, for the optimum performance from your computer, you’ll need to employ water cooling.
Table of Contents
Corsair Crystal 570X RGB
- Four tempered glass panels on the front, top, and sides of the case / Three included SP120 RGB LED fans...
- Room for up to six case fans, and compatible with 360mm, 280mm, 240mm, and 120mm radiators / Removable...
- Cable routing channels with included velcro cable straps for clean cable management / Easy-access...
Let’s be honest about it. It’s not always about performance when it comes to water cooling a system. Posting your pulsing rig on the r/pcmasterrace subreddit is one of the best feels in the world. If you choose the Corsair Crystal 570X RGB case, we guarantee that you (and your PC) will be the coolest kid on the block. The Crystal 570X RGB is a Mid-Tower case with enough room for a kitchen sink. The “570” denotes it as the Crystal line’s second largest, and you get what you paid for. Up to six case fans and any radiators measuring 360mm or less can be installed in the 570X.
It also has retractable fan trays to allow additional room for cooling fans, making it an excellent alternative for water cooling. The complete case measures 18.89 x 20.15 x 9.21 inches and weighs 24 pounds. The Crystal 570X is compatible with a wide range of motherboards, including ATX (up to 272mm), MicroATX, and Mini-ITX. Seven expansion slots, two 3.5-inch HD bays, and two 2.5-inch SSD bays are available.
All of the drive bays are positioned on the backside of the rear panel, which frees up space and greatly reduces clutter in the center region. The drive bays are also toolless, which is a minor but welcome feature. All of the fans are detachable, however the Crystal comes with three Corsair SP-120 RGB fans, which would cost $65 on their own.
Because the entire casing is made of glass panels, proper cable management is essential to avoid a cheesy appearance. The Crystal, thankfully, includes wire routing channels with velcro straps to keep everything neat and tidy. A power supply cover with Corsair’s emblem embossed on the front is also included.
In terms of design, the Crystal is one of the most attractive cases we’ve seen. Yes, it’s a matter of taste, but glass and RGBs simply work. While most cases settle for a single glass panel that reveals the interior, the Crystal goes to great lengths to turn you into a PC voyeur. It contains four tempered glass panels on the front, rear, and sides that expose the complete of your build.
All of that glass, on the other hand, works in tandem with the case’s RGBs. As previously stated, the case houses three SP120 fans, each of which may be customized with RGB lighting. The casing has an embedded controller that allows you to pick the exact color to match the theme of your project. Because of the glass panels, any RGBs pop out in a manner that other cases can’t match. The main flaw in the build’s look is the lack of RGB motherboard integration, which forces you to use the provided hardware rather than software to operate it.
Overall, the Corsair Crystal 570X is a stunning case, albeit one that lacks in practicality. The Crystal is for anyone who wants to show off their water cooling setup in the cleanest and most stylish way possible. Because this is a mid tower, double-check your measurements before installing a radiator, especially since there is just 1.5 inches of space above the motherboard. Make no mistake: Using the Corsair Crystal is a fantastic method to ensure that your build is one of the most unique.
Lian Li O11 Dynamic XL ROG Certified ATX Full Tower Gaming Computer Case
- Case Type: ATX full tower
- Front: tempered glass+aluminum
- Side: Tempered glass
Lian Li O11 Dynamic XL is one Best Cases for Water Cooling on the market right now, and it also happens to be the best case for bespoke water-cooling you can buy right now (in our opinion at least). The O11 Dynamic series has been enormously successful from its initial release, and it has now achieved near-legendary reputation among PC builders thanks to its distinctive design, incredible features, and spacious interior. The case was created in collaboration with renowned overclocker “Derbauer,” also known as der8auer in the community. He has made certain that the case is specially constructed with high-performance PC components in mind, which complements custom water-cooling systems perfectly.
The O11 Dynamic XL is a full tower chassis with dimensions of 471 x 285 x 513 mm and a weight of 11.6kg when empty. The case supports E-ATX, ATX, Mini-ITX, and mini ATX motherboards, so you may easily install any consumer desktop motherboard in the chassis, though we recommend avoiding motherboards smaller than standard ATX in this case for cosmetic reasons. The Lian Li O11 Dynamic has long been distinguished by its gorgeous tempered glass design, which is seamless both in the front and on the sides. Because the O11 Dynamic does not rely on its front side for ventilation, this design was chosen.
In terms of airflow, this case boasts a plethora of options to meet the cooling requirements of high-performance systems. In this situation, there are two key regions where intake fans should be installed. The O11 Dynamic XL includes fan slots not just along the bottom of the case, but also on the right side of the motherboard tray. These sections can house three 120mm fans at the same time and can also house the water-cooling radiators. The box accommodates radiators ranging from 120mm to 360mm in three distinct regions.
The space to the right of the motherboard tray can also be utilized to mount a water-cooling distribution block, with tubes spanning the length of the case to the heat-generating components. This method not only results in a beautiful and well-organized water-cooling loop, but it also contributes to the overall aesthetics of the project. Whatever strategy you take, the Lian Li O11 Dynamic XL is a fantastic case for bespoke water-cooling and will not disappoint.
Fractal Design Meshify 2
- Iconic angular mesh designed for filtered airflow and bold aesthetic
- Innovative case design opens up to fully expose interior on three sides
- Adaptable dual-layout interior fits up to and including 285 mm E-ATX
The Fractal Design Meshify 2 might be exactly what you’re looking for. By combining a mesh front with a modular interior layout that can be modified for water-cooling gear, the Meshify 2 excels at both air and liquid cooling.
The Meshify 2 can house two 360 mm radiators and a 230 mm (9-inch) tall reservoir while allowing a 13-inch GPU if you choose the open configuration without drive cages. Because the Meshify 2 is a little longer than most other mid-towers, it achieves this. The extra area also means there’s ample room for a cool distro plate if that’s your thing.
Fractal’s cases appeal to us since they are made of high-quality materials and are simple to assemble. The Meshify 2 isn’t any different. Even though we enjoy the removable top panel for air-cooled projects, it shines when creating a custom loop. The ability to approach your rig from the top greatly facilitates the building process.
The Fractal Design Meshify 2 comes with two vertical expansion slots by default, but if you want a little more space between the GPU and your tempered glass side panel, you can purchase the Flex B-20 vertical riser. Although a Flex B-20 isn’t strictly necessary for a water-cooled machine, it will allow you to run two vertical GPUs if that’s your thing.
Overall, the Meshify 2 is one of the best liquid cooling mid-tower cases available. Its versatility and ease of use set it apart from the competitors, and it should make your project go as smoothly as possible. The Meshify 2 comes in two colours: black and white.
Corsair Crystal 680X RGB High Airflow Tempered Glass ATX Smart Case,
- Equip your PC with outstanding high airflow cooling, with four fans and a Direct Airflow Path layout...
- Illuminate your system with three included LL120 RGB fans, boasting a total of 48 customizable RGB LEDs....
- An included CORSAIR Lighting Node PRO turns the 680X RGB into a smart case, powered by CORSAIR iCUE...
Corsair Crystal Series 680X is a formidable mid-tower case, and RGB fans and hinged tempered glass panels on the front and roof make it a true show-stopper.Its innovative dual-chamber design lets you to display exceptionally attractive creations while also providing enough of room for specialized water-cooling setups, all while keeping everything looking nice and tidy.
The 680X has a separate cooling chamber with many fan and radiator attachments, allowing you to be creative with your setup. In the front, it can fit radiators up to 360mm in diameter. The case can have a height of up to 280mm on top, 140mm in the back, and a depth of up to 280mm at the bottom. Because of all the good real estate it has to offer, the case is an excellent choice for a water-cooled design.
On the subject of views, the Crystal Series 680X comes with stunning RGB fans pre-installed. Corsair’s iCUE software allows you to completely customize and synchronize the 48 RGB LEDs. While the 120mm fans may not be large enough to meet the most demanding cooling requirements, they are a fantastic value right out of the box. The 240mm fan at the back, however, is not RGB. The 680X is compatible with a wide range of motherboard sizes, from Mini-ITX to E-ATX.
A removable tray with slots for up to 7 SSDs or HDDs is also included in the tower. When maxing out the drive capacity, however, air flow may be a difficulty; whereas, a water cooling-focused construction will have no such issues.
Overall, the Corsair Crystal Series 680X is an excellent value for money tower for anyone wishing to house a water-cooling setup. Its design includes a specialized cooling chamber with space for two radiators, as well as adjustable RGB lights that beg to be displayed off to friends or on your stream. You can fit as much storage as possible in your mid tower case with the option of up to 7 disks.
Thermaltake Core P5
- Panoramic Open Frame Design: Take advantage of full panoramic viewing to give an unrivaled chassis...
- 3-way Placement Layouts: Designed for Wall-mount, Horizontal or Vertical layouts, the Core P5 is flexible...
- VESA Compatibility: 200x200, 100x100, 75x75 (Weight determined once full system is installed)
There is no better choice than Thermaltake Core P5 if you are experienced and have the capacity to handle clean hardware construction. It’s a bench-style open-air chassis with tempered glass on top. Aesthetically, it has everything a gamer or a streamer might want. The panoramic perspective provided by the open frame design is breathtaking. You may enjoy the view by mounting it horizontally, vertically, or wall-mounted to free up some tabletop space. It has a small chamber on the back with adequate rubber grommets for running cable through.
An open-frame design has its own set of disadvantages. There is no barrier between the noise source and your ears because the bench is exposed. This necessitates the use of low-noise components, which are typically more expensive than standard hardware. The drives are set up in the back chamber. Because it has limited space and no ventilation, your storage disks will likely overheat. Installing an AIO cooler can be difficult due to the limited area for the radiator. A type-C connection, which is now commonly used by peripheral manufacturers, is also lacking from the front panel.
The case is VESA compliant, making wall mounting a breeze. The front panel is slim and sits directly in front of the chamber section. Two USB 3.0 ports and two USB 2.0 ports cover all of your peripheral requirements. Because of its multi-configuration capability, it is a playground for custom PC aficionados. Install your liquid reservoir and route your pipe to resemble a powerhouse. GPU mounting can be done in a variety of ways. You can position your GPU either horizontally or vertically. The chassis is overall strong and well-made, making it the ideal Open-Frame case for water cooling.
Corsair Obsidian 1000D
- THE ULTIMATE SUPER-TOWER PC CASE: Iconic and clean exterior lines, four smoked tempered glass panels and...
- STREAM AND GAME SIMULTANEOUSLY: The Obsidian 1000D can fit both a complete E-ATX and Mini-ITX system...
- MASSIVE COOLING OPTIONS: Up to 18 fan mounts and room for up to four 480mm radiators simultaneously.
Corsair Obsidian 1000D is one of the Best Cases for Water Cooling. Technically, you can install two PCs in this case with two or more power supplies. If you wanted to create a truly unique standard tower, this is the case for you. This super tower case is huge in every sense of the word. It weighs 65 pounds and measures 27.4 H x 12.1 W x 27.3 D inches. Such a large case also provides enough space for many cooling options. It can simultaneously house up to 18 fan mounts and four 480mm radiators.
Your tower monster starts out with a wide range of cooldown abilities. The 1000D can accommodate four 480mm radiators and 18 fans at the same time, giving you both air and water cooling. Installation of fans and radiators is also a breeze, with modular and telescopic brackets in the cooling bay. Overall, the 1000D pretty much requires some sort of custom cooling setup, due to all the space and ease of installation. To help keep things neat and orderly, the 1000D uses a three-chamber design, with French-style doors that provide easy access to the rear compartment and four removable tempered glass windows on the side. Overall, the look is very clean and utilitarian and the camera design easily compartmentalizes even the most extreme dual-system builds.
The CORSAIR Obsidian can accommodate two radiators in the front. Radiator sizes can range from 120 to 480mm. The rear of the case, on the other hand, can hold a 240mm or 120mm radiator, while the top can accommodate a 140mm to 420mm water cooling system. This box also comes with a built-in control for the fan and light. Installation of fans and radiators is also easy with the case’s telescopic radiator trays. Expanding your build shouldn’t be a problem with this super tower case, as it can support up to five 3.5-inch hard drives and up to six SSDs.
Hardcore gamers will certainly appreciate the ability to stream and play from the same tower thanks to the 1000D’s simultaneous dual system support of an E-ATX motherboard and a Mini-ITX motherboard. Another great feature of the 1000D is the huge storage media. Eleven separate bays house up to five 3.5-inch hard drives and six 2.5-inch SDDs. The staggering storage capacity is very much in line with the brand of this tower that tries to offer more of everything. Of course, no modern build would be complete without RGB support and the 1000D is no different. Corsair’s iCUE software governs the fan and light settings through an integrated Commander PRO controller. The controller gets the job done without complaint and is very easy to use.
Overall, the Corsair Obsidian 1000D is an excellent choice for a water-cooled PC version. Its three-chamber design allows ample space and provides connection points for any type of custom-cooled build, while the radiator capacity is best-in-class. You will need all the cooling capacity you plan to build the 1000D to its potential and load it with a dual system configuration and maximize its 11 storage units in total.
- New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
- Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes...
- STREAMLINED COOLING: 2 Aer F120mm fans included for optimal internal airflow and the front panel and PSU...
Despite its quality design, NZXT largely concentrates on air cooling cases, which also happen to be a feasible option for water cooling, making them one of the more affordable solutions.
The NZXT H510 CA-H510B-B1 water cooling case is ranked first on this list because it is one of the most economical alternatives available, making it ideal for customers on a budget. Despite its low price, this case can accommodate ATX, micro ATX, and small ITX motherboards. It also has a tempered glass side panel, in addition to its quality construction. For high-speed connectivity, there are USB 3.2 Gen 1 type A, USB 3.2 Gen 2 type C, and an audio port on the front. The bundled 2-year warranty is to be anticipated given NZXT’s reputation.
When it comes to hardware compatibility, this NZXT case can accommodate CPU coolers up to 165 mm height and GPUs up to 381 mm long. This case supports up to 2 x 140 mm front, 1 x 140 mm top, and 1 x 120 mm rear fans when it comes to cooling. If necessary, a 280 mm front, 120 mm top, and 120 mm rear radiator can be installed. Because this NZXT case features a PSU shroud, you can utilise 3 x 2.5 inch and 3 x 3.5 inch drives to meet your storage demands.
Cooler Master Cosmos C700M
- Highly versatile layout
- Graphics Card mounting with riser Cable
- Argo lighting; Expansion Slots: 8
Cooler Master C700M is the company’s flagship model, and it certainly one of Best Cases for Water Cooling. The striking metal handles catch your eye first, but it’s the sleek lines and visually attractive blend of light and dark materials that make your jaw drop. The Cooler Master Cosmos C700M is a full-featured behemoth of a full tower case with all the subtlety of a shotgun. The C700 M’s size and unusual flat radiator bracket design give it a lot of flexibility when it comes to water-cooling solutions. This tower has a maximum capacity of two 420mm radiators placed to the front, top, or side of the frame.
It’s a pricey case, but there’s a reason we dubbed it the best premium case for water cooling. Cooler Master has gone to great lengths to design and manufacture a case such as the Cooler Master Cosmos C700M. The RGB can be addressed using the preset routines provided into the chassis control, but it cannot be connected to the mobo for software-based customization. The storage drive mounting mechanism is archaic, but the ability to allow the installation of 1+5+4 is sufficient for content makers that demand a large amount of storage space.
This is an aesthetically pleasing masterpiece with a handle-like construction on top for transport. The I/O on the front panel supports USB 3.1 Gen2 Type-C, which is the most recent technology available on the market. It contains four USB 3.0 connections, a 4-pole headset connector, an ARGB button, and a PWM fan speed control button. You won’t find many curved panels on most chassis; it’s one-of-a-kind and aesthetically pleasing. The configuration flexibility does not stop with the radiator frame; the GPU can be put on custom-designed supports.
When it comes to building custom cooling loops, this gives you a lot of leeway, and the total radiator capacity is fairly large. However, if you intend to fully build up a water-cooling system, expect a tight fit.
Thermaltake Tower 900 Black Edition Tempered
- Supports Mini ITX, Micro VAX, ATX, E ATX Motherboard
- Dimensions: 16.7" W x 19" D x 29.6" H; Net Weight: 54 pounds
- Designed for high end gaming system compatibility; I/O Port USB 3.0 x 4, HD Audio x 1
The Thermaltake Tower 900 Black Edition is a massive super tower, twice the width of a typical tower. Inside, use its abundant space with a modular design that is cut down to the bone with just a screwdriver. This case beast is incredibly heavy, just as heavy as most fully-built PCs when empty. It’s not a very practical case for anyone, but its spacious interior is a modder’s paradise. If you’re looking to create an incredibly complex cooling setup, you’re in luck because the most common modification to the Tower 900 is custom water cooling. It has all the space you could need. It can accommodate all-in-one systems or custom loops and has a large radiator bracket.
It also has enough room for unrivaled cooling as it supports dual 560mm liquid cooling radiators. There are different mounting points on both sides of the case for proper space and location of the cooling systems. This super tower cage features a modular drive bay design that allows users to easily install one 5.25-inch hard drive, up to six 2.5 or 3.5-inch hard drives, and up to two 2-inch hard drives. 5 inches.
Otherwise, the case offers the expected features for a large size for its size. Its 5mm tempered glass is extra thick for its class and is hinged for easy access to internal PC components. The Tower 900 also supports EATX motherboards as the growing trend allows for a vertically mounted GPU. Despite its size, the Thermaltake Tower 900 Black Edition is not a great masterpiece. Her appearance is just fitting, nothing is terribly surprising about her appearance. It certainly looks and feels high quality, but there is nothing unique about it. However, it does feature RGB lighting controls, which is really a standard for a tower in this class.
This tower is a hot rod, designed to fit all possible modifications inside it and then open the throttle. This is the perfect case for building an indoor water cooling plant, providing incredible radiator capacity and plenty of mounting space. All in all, the Thermaltake Tower 900 Black Edition is a capable super tower that packs a lot of top-notch real estate. It can accommodate almost all constructions; Just make sure you don’t have to move it when you’re done, as the finished build will likely weigh more than 100 pounds.
Fractal Design Define 7
- Solid construction with industrial high-density sound damping helps maintain whisper silent operation.
- Convert to Storage Layout and install up to 14 HDDs alongside four dedicated SSDs mounts
- Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans.
The Fractal Design Define 7 has two interior layout options: “open” and “storage.” The open layout is similar to many existing mid-tower ATX cases on the market. An open main chamber with two 3.5-inch hard drive mounts under the PSU tunnel and two SSD mounts neatly placed beneath the motherboard tray. Storage mode allows for the installation of up to 14 hard drives in the chassis by relocating a piece of the hard drive tray to the opposite side of the chassis and inserting the additional hard drive trays included in the accessory box.
The Fractal Design Define 7 mid-tower chassis is available in black, grey, or white, with a tempered glass side panel as an option. The tempered glass side panel is available in clear, mild, or dark tinting depending on the color you select. The chassis measures 546.8 x 240 x 474.2 mm and weighs little more than 15.9 kg (35 pounds). The Fractal Design Define 7 is strikingly similar to the Define R6, R5, and Define S. The cases are so similar that one could be forgiven for mistaking them at first glance. In terms of aesthetics and style, the company appears to follow the “if it ain’t busted, don’t fix it” philosophy.
The dual-layout interior, vented top panel, dedicated fill port under the top filter for replenishing water loops, and Nexus+ 2 PWM fan hub will make the Define 7 a favorite among performance enthusiasts and water-cooling enthusiasts. This chassis’ overall build is exceedingly robust, and the fit and finish are excellent. If you want top-tier performance with a robust feature set, the Fractal Design Define 7 is a good buy.
Phanteks Enthoo 719 High Performance Full Tower Case
- High Performance full tower capable of extreme workstation and dual system
- Spacious open interior: supports up to ssi-eeb motherboard, Dual 480 and Dual 360 radiator support...
- Integrated Digital-RGB controller that can sync with compatible motherboards and Phanteks Digital-RGB...
The Phenteks Enthoo 719 is a full-size tower designed for maximum performance. It also has a lot of storage, multi-system capability, and multiple radiator compatibility, making it a perfect home for a water-cooling setup. The sleek aluminum and steel design, tempered glass panel, and eye-catching RGB LEDs make it a showpiece.
Enthoo 719 can accommodate twin 480mm and twin 360mm radiators at the same time. That huge radiator volume can serve as the foundation of your custom water-cooling setup. Of course, the Enthoo 719 has an extremely spacious interior with numerous of mounting spots, ideal for a looping design.
In terms of aesthetics, the case appears a little dull at first glance. Although it has a clever RGB strip application on the front, the case’s appearance is nothing out of the ordinary. The front is closed off, and the illumination of the fans behind it is also obscured. This rather negates the point of a water-cooling chassis, as aesthetics are an important aspect of bespoke loop builds. Nonetheless, the side panel is big and made of thick tempered glass, allowing you to show off your construct from this viewpoint. The closed front panel also means that airflow in this chassis isn’t always optimal, which defeats the point of water-cooling designs.
The setup is actually best suited in a water-cooled configuration, as the 719’s biggest shortcoming is its air flow. It merely stands one inch from the ground, and the back and right sides are entirely closed off, allowing air to flow freely only on one side. Instead of the two radiator systems, up to 15 fans can be installed, thus air-cooling isn’t entirely out of the question.
The Enthoo 719 is a full-fledged workstation. Despite prominently exhibiting Phanteks Digital-RGB, it offers dual-system and real EATX motherboard support, making it more than just a gaming rig. The dazzling RGB simply syncs with the motherboard and other Phanteks products, and you may vertically mount your twin graphics card, as with other showcases. Overall, the Enthoo 719 is a good alternative to the other alternatives in this series if you need a huge full-tower for a water-cooling build or if you need dual-system flexibility. The tower is well-built and has a beautiful interior layout, but it is expensive, a little plain-looking, and lacks good airflow, so the end-user must determine whether the Enthoo 719 is worth the money.
Cougar CONQUER ATX Gaming Case
- Case Form Factor: Mid-Tower
- Motherboard Support: Mini ITX/MicroATX/ATX
- I/O Panel: USB3.0 x 2, Mic x 1 , Audio x 1
The Cougar CONQUER ATX Gaming Case is a water-cooling case with military-inspired features. It is built to accommodate a 360mm water-cooling radiator on top and a 240mm radiator on the front. This case has thick tempered side glass panels that provide a complete view of the interior mechanisms, as well as three pre-installed LED fans that help to cool your PC and improve its performance. It has been specifically designed to support water-cooled radiators.
This water-cooling case has an aluminum frame on the front, which adds to its sturdiness and makes it very easy to construct and customize to your liking. It also includes all of the necessary parts and tools, as well as extra supplies to aid with its assembly. Cougar CONQUER ATX Gaming Case was ranked fourth on our list of the Best Water Cooling Cases. Cougar is a company noted for incorporating nasty aesthetics into their products. It is the ultimate masterpiece that everyone desires, making it the best one-of-a-kind case for water cooling. It has a 240mm radiator in the front and a 360mm radiator on the top of the chassis. There is enough space to add a custom loop. Buy some flexible tubes, practice your construction abilities, and then fill them with dye-colored water.
The Cougar Conquer ATX gaming case’s entire chassis structure is intricate, and users have stated that if not handled appropriately during shipping, it may begin to wobble. The front panel features a regular USB Type-A connection as well as HD Audio connectors. This premium case still lacks a Type-C connector. The storage is in the center, which disrupts the airflow from the front. Unlike other box-like cases, the construction is a little difficult. The entire assembly is initially flimsy until it is put together. However, it looks stunning after it has been assembled.
NZXT H500i Compact ATX Mid-Tower PC Gaming Case
- Premium quality: All steel construction with the sleek h series design; available in four color...
- Smart device: Built in RGB and digital fan controller powered by cam, delivers Hue+ and grid+...
- Adaptive noise reduction: Optimizes cooling and noise balance for the best gaming comfort
NZXT H500i is built with durability in mind and is among the Best Cases for Water Cooling. It is made entirely of steel with a tempered glass panel. The tempered glass panel is well made and easy to install and remove using a single screw to hold it in place. Regarding cooling, the configuration of the mini itx micro atx housing provides good airflow, even with two Air F120mm fans. With plenty of space for extra fans, you don’t have to worry about high temperatures.
Another pleasant surprise is the silence of the H500i. NZXT’s decision not to cut corners on the quality of the materials, thanks to impressive sound insulation. As a bonus, the smart device provides a silent preset that minimizes fan noise. If you are looking for perfect PC cases, you will be very satisfied with it. The H500I NZXT comes with a signature cable handling bar that simply gives the routing hole a .K for a smooth appearance. Features like routing channels and cable tie strips let you manage without just thinking too much about it. The biggest drawback is the CAM software that powers the integrated smart device. Many users have solved problems such as software not loading properly, lost functionality, LED control not working, etc. Since most of the problems have occurred with older versions of the software, make sure that your latest version (126.96.36.199 at the time of writing) should deal with it.
The enclosure has seven more wide slots, multiple drive episodes, and a port for an audio/microphone jack, as well as two USB 3.1 GEN1 type ports. Now, this case is a great choice when it comes to cooling power. It provides great air circulation despite having only two AirF120mm pre-installed. You have enough space to add more fans and no need to worry about the extra heat. It may have a 280 mm wide radiator at the front, another 120 mm at the rear. The matter is also fairly silent, which proves that the company was not behind in its conception or in picking up the materials. This PC case is great for water cooling and quiet operation, so we hope you will be very happy with this choice.
Great cable management is the signature of NZXT cases. It comes in the form of a bar that simply covers its routing hole and gives your PC a clean look without allowing the cables to ruin your construction. Naturally, this allows you to use routing channels, tapes, and more to keep the wires tidy in the best possible way and keep extra space for the things that matter. However, there is also a difficulty in referring to this model, and it is its CAM software, which powers the integrated smart device. The software is often reported as flawed and may not load properly, miss some functionality, or even cut off your LED commands. Since reports started arriving, the software has received an update that fixes most of its issues, so always make sure you have the latest version installed.
Rosewill TYRFING ATX Mid Tower Gaming PC Computer Case
- Spacious interior mid tower case with an expansive internal layout; supports large size motherboards...
- Sleek and stylish design plus superior function makes this PC case ideal for performance builds, system...
- Supports optional 360mm AIO liquid cooler radiator on top and optional 120mm radiator in rear; fits...
Rosewill TYRFING ATX Mid Tower is a good choice for beginners and those who don’t like complex reader installations. It comes with pre-installed fans that provide a solid foundation for your first build. For some tips on how to get started, check out our ultimate guide on how to build a gaming PC.
One thing that is not satisfied in this case is the spacer design: they are difficult to insert into the spacer holes by hand, so you will probably need to use tools and lots of power. This is a very neat professional enclosure with I / O panels mounted on top and a translucent panel with a side window. Additionally, this model also has quite an advanced cooling system, but we will get back to it soon.
This is a mid-tower case that is large enough to hold something that you can store in a complete tower case. It is one of the widest mid-tower models on the market, not only with great functionality, but it is also offered at extremely low prices. It is very user-friendly and suitable for beginners of PC building or for those who do not want to complicate matters. As a cool, it offers two pre-installed fans, although it can support three additional fans. Also, it can support a processor cooler up to 160mm, as well as 360mm long water cooling radiators on the front and top panels. For the mid-tiered case, it is worth a shot.
CORSAIR OBSIDIAN 750D Full-Tower Case
- Obsidian Series High Performance Case
- Minimalist Style, Maximum Potential
- High Airflow Front Mesh Design
If I could use any word to describe the cursor Obsidian 750D, it would be standard. While the price may discourage some people, it has been done so well that it justifies the exceptional construction cost. The housing is made of steel and brushed aluminum with smooth edges and glass panel hinges that fit perfectly. The OBCDian 750D provides plenty of space and has slots up to four SSDs. Cable operation with a removable channel to hide the cable is smooth and easy. One drawback is that Corsair has decided to move the screwed top panel to this model, and unscrewing it every time does not seem to be an optimal solution. This case is quite heavy, as in most cases made from solid materials. This is not necessarily a problem, but if you like the light case, remember something.
Phanteks Eclipse Steel ATX Mid Tower
- Full Metal Body, Steel Exterior and Tempered Glass Side Panel. Clean interior –PSU Cover & HDDs. 10...
- Fully Equipped with Magnetic Dust Filters. Innovative Modular HDD System (requires PH-HDDKT_02). 2x...
- Full Size PSU support. Removable HDD cage for installation of long PSU's (>270mm)/water-pump.
Phanteks Eclipse Steel ATX Mid Tower is a very good budget case. This is a very economical package considering that it can accommodate any motherboard, including e-ATX. The front panel provides a variety of ports, such as a microphone and audio port, two USB 3.0 ports, as well as an RGB switch. The enclosure comes with enough space to include two 3.5-inch drive bays, a 2.5-inch drive bay, and your further 2.5-inch drive bay. There are a total of 7 PCI slots, and it even comes with a 120mm exhaust fan on the back.
This housing has two very easy to access filters – top, bottom, and front. But the most notable part of the case is its great cable handling, it includes velcro straps and can help you root your cables easily. This case combines both performance and aesthetics, and it looks both elegant and professional in addition to being highly functional. This is a great option for those on a tight budget, so think about it.