Building the ideal gaming computer is difficult and interesting. You have to manage it for its effective operation in addition to spending hours looking for the appropriate accessories. So, despite putting in hours of effort, your PC may occasionally fail to run a graphics-intensive game; or it may stop working simply because it needs a tiny accessory to cool it down. In these situations, the ideal cooling solution is to utilize a high-end GPU cooler.
Table of Contents
Arctic Accelero Xtreme IV High-End Graphics Card Cooler
- UNMATCHED COOLING PERFORMANCE: With a cooling capacity of 300 Watts, the Accelero Xtreme IV offers an...
- BACKSIDE COOLER FOR HIGHEST EFFICIENCY: ARCTIC has developed and patented a back side cooler for...
- INSTALLATION WITHOUT THERMAL GLUE: Up to now the meticulous work of attaching different heatsinks with...
Arctic Accelero Xtreme IV is one of the Best GPU Coolers in 2023. This aftermarket gpu cooler is huge, so before you decide to get it, make sure you have enough space in your case. Also, this cooler is rather expensive. You better have a pretty good reason to get one. Arctic understands the importance of keeping your rig cool, so they came up with an interesting solution in their patented stern cooler. The design allows mounting without thermal glue, and although it is not quiet, it is very quiet. This is due to a new fan controller, PWM control, and low noise impellers.
With three 92-millimeter fans spinning as fast as 2,000 rpm, the Xtreme IV has enough horsepower to handle a 300-watt Thermal Design Power (TDP) GPU. This includes the 2080 Ti, 1080 Ti, and everything below. The cooler is designed to fit any GPU with a standard 98mm width printed circuit board (PCB). To find the full list of compatible GPUs, visit the manufacturer’s page. The design is very user-friendly and comes with all the insulation pre-applied, so you won’t have to worry about your GPU’s processor and VRAM chips. Overall, you’ll get much lower temperatures and less system noise, all for an affordable price.
Installation is quite simple and requires no gluing. It also provides a backplate cooler or heat sink for cooling VRAM and VRM. The performance of this graphics card cooler is top-notch and you can expect a temperature drop of up to 25-30 degrees Celsius compared to the original cooling. It comes with the MX-4 thermal compound which is suitable and you need to buy more thermal paste. This graphics card cooler is compatible with the latest high-end graphics cards including Nvidia GeForce GTX 1060/1070/1080 and AMD Radeon RX 480.
In terms of performance, the Accelero Xtreme IV performs very well. Compared to the original GTX 1080Ti Founders Edition board cooler, the aftermarket cooler lowered temperatures by almost 30 degrees Celsius. Even running the original cooler at 100%, the Accelero Xtreme IV performed significantly better. This is an amazing result and the best recommendation for this cooler you can get. And it’s not noisy either. It’s much quieter than the stock card cooler. This card isn’t as fancy as some of our other options, but it works as advertised and will drop your GPU card temperatures by more than a few degrees. This is one of the best VGA coolers if your budget is tight and comes with a long 6 year warranty to boot. This is the Best GPU Coolers in 2023.
Corsair Hydro X Series XG7 RGB GPU Water Block
- Unlock your RTX 2080's true potential with custom cooling for your graphics card.
- Precision CNC cut nickel-plated copper construction With more than 50 high-density cooling fins...
- Premium total conversion design cools not just the GPU, but your graphics card’s Memory and VRM as...
It is undeniable that Corsair produces high-end gaming accessories. Every gaming gadget the company has created, from the cases to the RAMs, is worthwhile and robust. Corsair’s Hydro X Series is a testament to their track record and commitment to producing high-end peripherals. To keep the temperature of your GPU under control, the Hydro X Series is a total conversion liquid cooling block for your Nvidia GeForce RTX series cards, particularly the RTX 3070 cards.
You may completely realize the ray-tracing GPUs’ true capabilities by using this liquid cooling block. For incredible cooling and gorgeous beauty, this CNC-milled nickel-plated copper block with an aluminum backplate is cloaked in interesting RGB lighting. The GPU is covered by more than 50 high-density cooling fins, which allows for a significant temperature reduction while still maximizing GPU performance. The good news is that this block keeps your GPU cool while also keeping the temperature of your graphics card’s RAM and VRM under control.
It differs from other cooler blocks since it has 16 RGB LEDs that are built right into the GPU block. By using Corsair’s iCUE software, you have unlimited freedom to customize the RGB lighting. Additionally, to give it a distinctive appearance, you may sync the lighting pattern with other Corsair products.
The good news about the block is that it is made to accommodate practically all of the high-end RTX series, including the RTX 2080 Super, RTX 2080 Ti, RTX 2070 Super, RX 5700, and XG7 2080 FE. The block completely encloses the PCB of your card and safeguards the delicate parts. Additionally, the pre-applied thermal strips make it easier for you to install the block.
The fact that this GPU cooling block is only compatible with the RTX series is its only drawback. Other AMD or Nvidia cards cannot be used with this configuration. So keep that in mind when making a purchase for this block.
The Corsair Hydro X series provides the greatest thermal solution for your RTX GPU and is the best liquid GPU cooling block overall. This is intended for gamers that want to use a unique loop for expensive GPUs. This is the Best GPU Coolers for Gaming in 2023.
NZXT Kraken G12 Enhanced GPU Cooling
- Enhance your GPU cooling: With a 40% increase in cooling capacity compared to stock cooling, you’ll...
- Comprehensive compatibility: Supports both reference and non reference design AMD and Nvidia GPUS, for...
- Active cooling for VRM: Comes with a 92 millimeter fan, providing active cooling for the VRM and memory...
The NZXT Kraken G12 is a mounting bracket for AIO coolers that goes over your graphics card. You then connect an AIO to the G12 and voila, you have an AIO cooling system for your GPU. The G12 supports many models of AIO coolers from several manufacturers. The 92mm fan provides adequate airflow to keep your VRM GPUs running at peak performance, giving you wide options when it comes to overclocking. The simple design is appealing to those who want to break away from the RGB craze and also allows for hassle-free setup.You can get up to 40% increase in your cooling with this kit which sports a 92mm fan for active cooling of VRM and memory without your board. The fan speed is 1500rpm with a gun bearing while the cooler assembly measures 201mm x 113mm 32mm. While this is your build in the end, we also think the G12 is a snap to set up.
The unit has a 92mm fan that provides active cooling of the VRM on its board. With a fan speed of 1500 RPM, the fan rotates silently using the gun bearings. As a result, the fan provides 40% more cooling compared to a normal cooling unit. This is a cooling unit that fits on your graphics card to allow for the fit of an AIO cooler. The good thing is its great compatibility, as it can work with a variety of reference and non-reference designs to fit almost any GPU available on the market. Kraken G12 supports 50+ GPUs and 30+ systems. Liquid refrigeration. The company claims that the cooler can be locked with all graphics cards including MSI, Nvidia, Gigabyte, and GPUs ranging from Nvidia RTX 2060 Super cards to AMD cards like RX 480 and 5830.
NZXT designed the G12 to work with a wide variety of boards in both benchmark and non-benchmark designs. This means it will work with over 40 different GPUs and over 30 liquid cooling systems. NZXT coolers are a lock, as are systems from Corsair, Thermaltake, Zalman, and Antec. When it comes to cards, NVIDIA covers the RTX 2080 through the old 570 while AMD goes from the RX 480 to the 5830. The NZXT also offers 2 years of full warranty with Kraken G12 to ensure the unit is durable enough to withstand the highest GPU temperature. Overall, the G12 is the best AIO liquid cooler supporting almost all of the powerful GPU cards available on the market.
Id-Cooling Frostflow 120 VGA Graphic Card Cooler AIO
- 【Multi Compatibility】The GPU Water Cooler is compatable with RTX2070/2080/2080Ti, 5700/5700XT Series,...
- 【Better Heat Dissipation】The VGA cooler comes with 120mm radiator and dual 120mm fans with a cooling...
- 【Why Need VGA Cooler】The VGA liquid cooler can offer efficient cooling for your graphic card to...
ID-Cooling is one of the largest Chinese cooling manufacturers, with a wide range of the Best GPU Coolers for gaming. Their Frosftflow 120 is an AIO (all-in-one) cooler for those who want to hit solid temperatures when overclocking. Featuring a simple and minimalist design with a matte black color, the ID-Cooling Frostflow 120 GPU cooler might not appeal to you. The cooler comes with a simple red LED fan and logo that gives your GPU some sort of color, which is obviously not as fascinating as the one offered by RGB coolers. Even without RGB, the design isn’t disappointing.
With a simple and minimal design with a matte black color, the ID-Cooling Frostflow 120 GPU cooler may not like it. The best cooler for gpu comes with a simple red LED fan and a logo that gives your GPU some kind of color, which is obviously not as fascinating as RGB coolers offer. Even without RGB, the design is not disappointing. Still, its extraordinary performance and great price make it the best GPU cooler available on the market. The ID-Cooling Frostflow 120 GPU Cooler is fully compatible with all Intel and AMD chipsets to ensure that you will not encounter any issues when installing it into the case. The cooler has a single 120mm fan with a speed of 800-2000rpm, which is on the same level as the Arctic Accelero Xtreme, but 500rpm higher than that of the NZXT Kraken G12.
Still, the best aio gpu cooler has extraordinary performance and great price make it the best GPU cooler available on the market. The ID-Cooling Frostflow 120 GPU cooler is fully compatible with all Intel and AMD chipsets to ensure that you won’t encounter any issues while installing it in the case. The cooler has a single 120mm fan with a speed of 800-2000rpm, which is on the same level as the Arctic Accelero Xtreme, but 500rpm higher than that of the NZXT Kraken G12. Overall, this is the most affordable AIO cooling system for GPUs that offers relatively better performance than normal underrated coolers. Games that require low temperature and less graphics performance can be run using this card, but for overclocking it might not be the perfect option for you.
Raijintek Morpheus II Universal GPU Air Cooler
- Cooling capacity up to 360 watts TDP
- 12 pcs copper heat-pipes and 129 pcs fins for efficient heat dissipation
- 24pcs heat-sink for RAM & 1 big heat-sink for VRM
This is the Raijintek Morpheus II, a very good passive and active Best GPU Coolers that will allow your high-end GPU to run through games while being fully overclocked. Combined with aluminum and copper heatsinks, the cooler works perfectly. The 12 6mm diameter heat pipes provide cooling capacity of up to 360 watts. Similar to the ID-Cooling cooler, the Raijintek Morpheus II is also a non-RGB model lacking in fascination with color lighting.
The cooler includes two high-end Noctua NF-F12 fans and two heat pipes for better and consistent performance in heavy games. Combined with aluminum and copper heat sinks, the cooler works perfectly. The 12 6mm diameter heat pipes offer a cooling capacity of up to 360 watts. Similar to the ID-Cooling cooler, the RAINJINTEK MORPHEUS II is also a non-RGB model that lacks fascination with color lighting.
The RaijintekMorpheous II VGA Cooler is a product that will probably require you to seek professional outside help. You should not install this product yourself, even if you have a good understanding of how your GPU works. The process itself is extremely difficult to do, the installation is quite complicated. The choice of which fans to add to the heatsink is up to you, however this can be a huge advantage as you can now invest in high-end Noctua NF-F12 fans to add. They are probably the best PC fans in the world today. Add 2 of these fans above the radiator to forge the world’s most amazing and perfect GPU air cooler. Thus, the choice of fans leaves room for customization, as long as they measure 120 mm.
If you want to get very solid and reliable temperatures but are hesitant to invest in water cooling, this is one of the best alternatives. The huge heat sink allows the VRAM and the processor to cool very quickly due to its very large surface. Overall, the Raijintek Morpheus II is a great choice if you are looking for a quiet cooler with plenty of power. While it doesn’t support a wide array of GPUs, it can be a great buy for the right person. Check the manufacturer’s website for a full list of supported GPUs.
ARCTIC Accelero Twin Turbo III Graphics Card Cooler
- COOLING PERFORMANCE: ARCTIC´s patented backside cooler, the MX-4 thermal compound (pre-applied) and two...
- HIGH EFFICIENCY: ARCTIC has developed and patented a back side cooler for unparalleled VRM and RAM...
- INSTALLATION WITHOUT THERMAL GLUE: Up to now the meticulous work of attaching different heatsinks with...
Arctic Accelero Twin Turbo III is an air cooling solution for the budget conscious. The product has its own heat sink, pipes, and fans, so it basically has its own setup to work with. There were two fans on this one compared to three on the other product. The two fans are 92mm in size and can reach a maximum speed of 2000rpm each. The Twin Turbo III runs relatively quietly at just 0.3 stones or a maximum of 24.5 dBA. It can reach a maximum cooling capacity of 250 watts, which is very good considering the price of the product. The installation process is somewhat complicated as there are not enough instructions, even on the product website the process was very vaguely described.
You should have a good mid-tower or full-tower case for this graphics card cooler as it is quite large and can take up to 3 slots in your case. The best aftermarket gpu cooler comes with MX-4 thermal compound pre-applied, which means you don’t have to buy thermal paste separately. Even with two fans, this GPU cooler is still very quiet compared to stock coolers. This graphics card cooler offers great performance and you can expect a temperature drop of up to 20 degrees Celsius, which is great. The cooler comes with the proper instructions for installation and does not require thermal glue to install. It is compatible with the latest NVIDIA GeForce GTX 1060/1070/1080 and AMD Radeon RX 480 graphics cards.
How to Choose a GPU Cooler Buying Guide
Features
GPU coolers have many different features. Your GPU cooler can come with RGB components. Additionally, if you intend to purchase RGB-enhanced GPU coolers for gaming, you should confirm that the motherboard’s software or an RGB header may be used to control the cooler’s lights. If you don’t, you will receive certain cycles that have been pre-programmed. These cycles can last the duration of the sync’s whole build-out.
You will also receive one that will rise on your GPU’s PCB. The best way to achieve the ideal temperature is to purchase a GPU cooler. If the air from your VGA cooler is directed directly onto the GPU’s fans, you will notice significant benefits. Only get a GPU cooler if you have a high-end gaming GPU. For GTX 1650 or GTX 1660 Ti, using a GPU cooler would be a complete waste of money.
Compatibility
Even though you have familiarized your PC with each of the other major parts as well as the fan controllers, there may still be some compatibility issues. The size of the cooler should be carefully considered before purchase because you will require a space for it. While some coolers have a design, others do not. According to the coolers’ brands, compatibility varies. You ought to get one from the manufacturer’s website rather than depending on listings.
Performance
The performance and cooling a GPU cooler delivers are two of its most crucial characteristics. A GPU cooler gives you a high-end gaming experience since it keeps your gaming computer cool and allows it to continue working even while you’re using demanding visuals in games.
The best GPU cooler for gaming also has numerous fans and impellers that operate quietly, resulting in a quiet cooling operation. With the additional cooling provided by the GPU cooler, you can play uninterrupted for extended periods of time.
If your desktop computer is overheating when you’re playing a game or processing a movie, a GPU cooler will also assist. The important point is that you won’t even have to listen to the fan creating noise or the blades moving because GPU coolers offer silent cooling. That must be a relief.
Noise
The majority of the GPU Coolers mentioned run quietly and without making any noise, which will please you. The cooler is incredibly quiet because to the low noise impellers that are included. As a result, you won’t have to worry about background noise when playing a challenging game or working on a crucial assignment.
But keep in mind that utilizing a fanless GPU cooler to reduce noise is not advised because your graphics card may overheat without a fan, which can be very damaging to your system.
AIO or a hybrid?
It will be a comfort if you choose the best AIO GPU Cooler because these all-in-one coolers come with closed lids and don’t need maintenance. AIO coolers are not refillable like other coolers, but the good news is that they significantly enhance GPU cooling because they have more cooling capacity.
A hybrid GPU cooler, on the other hand, transfers heat from your GPU to a radiator before dispersing it into the atmosphere. A hybrid cooler is a sensible option because it reduces heat radiation while maintaining cool temperatures.
Passive or liquid?
If you decide to use a liquid GPU cooler, you should be aware that a complete cover water block and liquid cooling make it simple to overclock the GPU. Additionally, it aids in preventing heat throttling, performance reductions, and high core frequency. You will enjoy the same advantages from using a liquid GPU cooler as you would from using water on a GPU.
If your objective is to reduce noise and preserve perfect silence, it is advisable to use the passive GPU cooler. It will always operate quietly, but if it gets too hot, it may throttle or shut down. This could provide some difficulties because it might disrupt the game’s continuity and flow.
Pricing
Are you seeking for the greatest GPU Cooler for the R9 that is also reasonably priced and within your means? No cause for concern. We can bring that about. Each of the GPU coolers mentioned has been specifically chosen after careful consideration. You don’t need to worry too much about the prices because all of these GPU Coolers are within reach.
Frequently Asked Questions
Do I need a GPU cooler?
To provide a cold air intake and a hot air outflow from the GPU, a GPU cooler is necessary. Additionally, a GPU Cooler ensures that a specific temperature is maintained while assisting your GPU in operating more quickly and effectively. It makes sure that your system does not lag or shut down while you are playing a game, preventing you from losing any important data.
How to install a GPU cooler?
It is not difficult to perform and is fairly straightforward. It would be better if you began by putting the baseplate before securing it. After doing that, proceed to mounting the fans on the radiator. To prevent lagging from occurring, ensure that the fans are installed properly. The radiator should then be installed and secured, and all the wiring and cables should be organized and correctly attached. Finally, adjust the pump as needed, fasten the clamps, and turn on the GPU Cooler.